24小时咨询电话

当前位置:主页 > english > Products > Latex source (pure) >

Latex source (pure)

作者:admin发布时间:2021-06-08 13:17

乳胶源(纯品) 拷贝.jpg

Introduction to the

This product is not mixed with any doping source, customers can according to the production technology needs of the enterprise, in the latex source can be mixed with phosphorus, boron, arsenic, antimony, aluminum and other certain concentration of impurities, the content of impurities can be adjusted in a larger range;Make it a doped silicon dioxide emulsion, which can be applied to impurity diffusion. Using doped silicon dioxide emulsion, a series of advantages that are not available to other commonly used sources at present can be obtained.

Spread in the silicon wafer surface after the source of latex coating will not damage the surface of silicon, phosphorus source diffusion and there is no such as liquid contamination, such as metaphosphate and clean silicon surface alloy and latex source in the coating and the diffusion of less toxic impurities precipitation, especially with phosphorus arsenic and other toxic substances diffusion source, use latex source is far more convenient than liquid source security,But also can prolong the quartz tube service life and so on.

 

operation cautions; handling precautions 
1. Avoid contact with skin and eyes.
2, prevent the inhalation of steam and smoke.
3, do not close to the fire.- No fireworks.Take measures to prevent the accumulation of static electricity.
4. Pay attention to hand protection when using this product: wear anti-poison penetration gloves. 


Safe storage precautions

1. Store in a cool and ventilated warehouse.

2, away from fire, heat source.Keep container sealed.Should be stored separately from oxidants and acids, and should not be mixed.

3, the use of explosion-proof lighting, ventilation facilities.

4. Mechanical equipment and tools that are easy to generate sparks are prohibited.



上一篇:没有了

下一篇:没有了

推荐新闻: